Properties and Usage

Zinc oxide (ZnO) forms colorless hexagonal crystals or a white dusty powder. When heated, its color turns into lemon yellow changing into white again when cooled down. Zinc oxide has a density of 5,61 g/cm³. It evaporates at 1300 °C and above and sublimates as it reaches a temperature of 1800 °C. Hence, there is no (liquid) melt but a direct transition from the solid into the gaseous aggregate state [1].

Zinc oxide has a very broad and versatile range of application including technical products, cosmetics, and pharmaceutical uses. At present, zinc oxide is selling strongest in the rubber industry. Used as additive, it promotes the process of vulcanization in rubber that is used for tire manufacturing. In addition, its good conductivity improves the removal of heat that is generated during the churning motion of the tires. When added to cement, zinc oxide increases the water resistivity and prolongs the processing time. Zinc dust and “zinc white” are also used as pore fillers in surfacers and smoothing cements and as gray or white wall or artist’s paints.

ZnO broken urchin © EmpaZnO broken urchin © EmpaMoreover, zinc oxide is used as catalyst in the chemical industry or for manufacturing cosmetic products. Zinc oxide together with ichors develops into antiseptic and astringent zinc salts, which is why it is used by the pharmaceutical industry for manufacturing zinc ointments, zinc pastes, adhesive tapes, and bandages for skin and wound treatment.

There are different electronic components, for example piezo-electric converters, transparent conducting oxides, sensors, luminous diodes, and optoelectronic or spintronic components, that at present are barely conceivable without zinc oxide. Also, zinc oxide-based semiconductors are used as transparent conductive layers in blue light-emitting diodes, liquid-crystal screens, varistors, and thin-film solar cells.


Nanoparticular zinc oxide is transparent in the visible range of the light spectrum and acts as a physical filter against the UV-B and particularly UV-A radiation of the sun. The fact that the ultraviolet rays are absorbed and are reflected like from small mirrors makes it interesting to use zinc oxide as a physical UV filter in sunscreens. Physical UV filters are mainly used in sunscreens with sun protection factors above 25. Unlike chemical UV filters that may trigger allergization, physical filters are suited for application to the sensitive skin of children and allergic persons. Chemical UV filters absorb UV radiation and convert it into heat.


Comparison of physical vs chemical UV filters. © Infografic BASF.Comparison of physical vs chemical UV filters. © Infografic BASF.

The sizes of ZnO particles used for sunscreens are in the range of 20 to 60 nm. Before being added, these very small ZnO nanoparticles are coated with silicon or aluminum oxide. They then coalesce into aggregates sized 200 – 500 nm. Studies conducted by the industry as well as independent studies carried out within the EU project NanoDerm have shown that such particles contained in sunscreen products do not penetrate the body through the healthy skin, hence are not hazardous to the health of consumers [6,8].


Since zinc oxide nanoparticles are characterised by their UV-A and UV-B protection properties as well as by the previously described transparency and antibacterial and fungistatic effects, they are also used in textiles, clear varnishes for wood products and furniture, and in transparent plastics and plastic films (plastic glasses). The latter are characterised by a high transparency (> 90 % transmission) in the visible spectral range and UV permeability (< 10 % transmission) for wavelengths below 360 nm.


Zinc oxides are not self-inflammable as nanometer-sized powders. The mixture of zinc oxides and air (dust) under the influence of an ignition source is not flammable, so there is no possibility of dust explosion.


Occurence and Production

Zinc oxide (ZnO) occurs in nature as a coarse-grained mineral (zincite). Technically, it is obtained by oxidation of zinc or zinc vapor with atmospheric oxygen (zinc white) or by calcination of different components such as zinc hydroxide, zinc carbonate or zinc nitrate. Technical zinc oxides often contain lead. Such plumbiferous compounds must be marked with the corresponding hazard symbol (Xn) [1].


NanoCare Data Sheet


Literature arrow down

  1. (DE): Zinkoxid (last access date: Jul 2011).
  2. Klingshirn, C et al. (2006), Zinkoxid - ein alter, neuer Halbleiter, Physik Journal, 5(1): 33.
  3. Klingshirn, C (2007), ChemPhysChem, 8(6): 782-803.
  4. Fallert, J et al. (2008), Opt Express, 16(2): 1125-1131.
  5. Product Database
  6. EU-Project NanoDerm (last access date: Jul 2017).
  7. BASF Infoservice (EN): The new generation of UV filters: reliable all-round protection for the whole day (last access date: Jul 2011).
  8. BfR Opinion No. 037/2010 (18.06.2010). Sunscreen: According to the current stat e of knowledge zinc oxide as UV filter is safe .


Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.